Cereals & Grains Association
Log In

Effect of Kernel Size, Location, and Type of Damage on Popping Characteristics of Popcorn

September 1997 Volume 74 Number 5
Pages 672 — 675
V. Singh , 1 N. L. Barreiro , 1 J. McKinstry , 1 P. Buriak , 1 and S. R. Eckhoff 1

Graduate research assistant, former undergraduate students, and professor, respectively, Department of Agricultural Engineering, University of Illinois, Urbana, IL 61801. Mention of product or trade names does not imply endorsement by the University of Illinois.


Go to Article:
Accepted June 30, 1997.
ABSTRACT

Popping characteristics, specifically expansion volume and popping time, were studied for damaged popcorn. A single variety of commercial undamaged yellow popcorn was separated into four size fractions (D < 4.36, 4.36 < D < 5.16, 5.16 < D < 5.95, and D > 5.95 mm) by screening with round-hole sieves. Kernels were damaged using a razor knife by either slicing a 2-mm diameter piece of the endosperm or the germ or by cutting through the pericarp and seed coat into the endosperm or the germ ≈2 mm. A total of five combinations of location and damage were studied (tip cap removed, side cut, side sliced, germ cut, and germ sliced) for each kernel size. A control sample with no damage was also analyzed for each size fraction. All of the damaged kernels (regardless of type of damage) popped, but they had expansion volumes 9.1–47.5% smaller than those of undamaged kernels. The expansion volume of damaged kernels increased by 52.5–85.7%, depending on the damage, when the size of the kernel increased from <4.36 mm to >5.95 mm. Removing the tip cap and slicing through the germ caused less loss of expansion volume than did other types of damage. Damaged popcorn kernels had faster popping times (12.2–24.0 sec) than did undamaged kernels (30.9–34.6 sec). Popping times increased with increasing kernel size for all types of damage.



© 1997 by the American Association of Cereal Chemists, Inc.